|
|
Send InquiryInjection Molding Machine
Injection Molding Machine Specification
- Capacity
- 220 Ton Clamping Force
- Manufacturing Year
- 2023
- Power
- 18.5 kW
- Origin
- India
- Voltage
- 380 V
- Machine Type
- Hydraulic Injection Molding Machine
- Dimension (L*W*H)
- 5.8m x 1.6m x 2.2m
- Output
- 240 pieces/hour
- Used For
- Plastic Product Manufacturing
- Color
- White & Blue
- Weight
- 4500 kg
- Condition
- New
About Injection Molding Machine
We offer a wide range of fully automatic plastic injection moulding machines to our customers. We offer these products in global market within definite time and at affordable prices, with following specifications:
|
Make |
|
JSW350TON |
|
Model |
|
350TON-E2 |
|
Making Year |
|
1999 |
|
clamping force |
Ton |
350 |
|
screw diameter |
mm |
66 |
|
shot weight PS |
g |
890 |
|
shot volume |
cm |
920 |
|
injection pressure |
kgf/1/2 |
1840 |
|
tie bar distance H x V |
mm |
730 x 730 |
|
mould height min |
mm |
300 |
|
mould opening stroke |
mm |
700 |
|
Total Opening ( Daylight) |
mm |
1370 |
|
Ejector stroke |
mm |
125 |
|
Ejector Force |
Ton |
8.3 |
|
main motor |
Kw |
45 |
|
heating total Load |
Kw |
15.6 |
|
machine weight |
Ton |
14.4 |
|
dimensions of the machine L x W x H |
m |
7.95 x 1.84 x 1.92 |
|
Oil Tank |
|
900 |
Advanced Hydraulic Design
Featuring a hydraulic system and a powerful 18.5 kW motor, this injection molding machine offers precise control and consistent performance. The 350 L oil tank and water-cooled mechanism allow for stable operation and efficient heat dissipation, supporting long production runs with minimal downtime.
Efficient Production Capabilities
With a clamping force of 220 tons and a fast cycle time of 18 seconds, the machine achieves high output without compromising on product quality. Suitable for a wide range of plastic products, its maximum and minimum mold height flexibility allows easy adaptation for different project requirements.
Intuitive and Safe Operation
The PLC-based automatic control system enhances productivity by simplifying operations and minimizing manual intervention. Safety is prioritized with an emergency stop button and interlock guard, ensuring both operator protection and compliance with industry standards.
FAQs of Injection Molding Machine:
Q: How does the PLC-based automatic control system benefit the production process?
A: The PLC-based automatic control system streamlines operations, providing precise control over the injection molding parameters. This minimizes human error and increases consistency in production, leading to higher quality products and enhanced manufacturing efficiency.Q: What types of plastic products can this injection molding machine produce?
A: This machine is versatile and can manufacture a wide variety of plastic products, from containers and automotive components to consumer goods, owing to its adaptable mold height range and significant clamping force.Q: When should the oil tank and water cooling systems be maintained?
A: Routine maintenance for the oil tank and water cooling system should ideally be performed according to manufacturer guidelines, typically every few months or after continuous long production cycles, to ensure smooth operation and longevity of the machine.Q: Where can this machine be installed, considering its dimensions and power requirements?
A: Due to its substantial size (5.8m x 1.6m x 2.2m) and 18.5 kW power demand, the machine is best suited for dedicated industrial spaces with adequate electrical infrastructure and water supply for cooling, such as manufacturing plants or large workshops.Q: What is the injection molding process with this machine?
A: Plastic granules are fed into the barrel, melted by the 12 kW heating system, and injected into the mold at up to 200 grams per second. The hydraulic system ensures precise clamping and the PLC controls the cycle for consistent results every 18 seconds.Q: How is safety ensured during machine operation?
A: Safety is a priority, maintained through features like an emergency stop button and interlock guard, which immediately halt operations if any unsafe condition is detected, reducing the risk of accidents during use.Q: What are the key benefits of using this injection molding machine for manufacturers?
A: Manufacturers benefit from high output rates, reliable and precise control, energy-efficient operation, and robust safety features. Its versatile configuration supports diverse product requirements, improving productivity and ensuring consistent manufacturing quality.
More Products in Used Plastic Injection Moulding Machinery Category
Plastic Injection Molding Machine
Condition : New
Used For : Molding plastic components
Feature : High precision, energy efficient, automated control system
Capacity : 220 tons clamping force
Power : 18 kW
Weight : 4500 kg
Used Plastic Injection Molding Machinery
Condition : Used
Used For : Manufacturing plastic products and components
Feature : High Efficiency, Durable Structure, Energy Saving
Capacity : 220 tons clamping force
Power : 23 kW
Weight : 7500 kg
Sumitomo SH 280
Condition : Used
Used For : Heavy Duty Excavation, Construction, Mining
Feature : High Performance, Fuel Efficient, Advanced Hydraulic System
Capacity : 1.4 m³ (Bucket capacity)
Power : 198 HP
Weight : 27,800 kg
JSW50TON Used Machinery
Condition : Used
Used For : Plastic Product Manufacturing
Feature : Electric Motor Control
Capacity : 50 Ton Clamping Force
Power : 11 kW
Weight : 3300 Kg
Contact Details
GST : 06AALFM2356E1ZE
Send Inquiry
|
|
|
|
 |
MECHATRONICS MACHINERY & TOOLS (INDIA)
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |
